PicoBOB-DLX CNC control module

Please note that while the PicoBOB-DLX hardware is tested and fully functional, the software (especially LinuxCNC/Remora) is still under active development.

Standard 5V Parallel port interface for many CNC machines and peripherals.  When combined with Mach3 Breakout Board, has the following features:

• 5 axes of step/direction control
• 10A Spindle Relay
• 0-10V Analog spindle speed control
• 5 opto-coupled inputs
• One 24V output 

The PicoBOB DLX can also be used with the Gecko G540 multi-axis step drive and supports all of the I/O on that device.

Host communication is via Ethernet or USBC connectors.

When combined with the Remora RP2040-W5500 component, the PicoBOB DLX can be used as an ethernet attached step generator with LinuxCNC.  For details, the Expatria development branch is located in this repository:
https://github.com/Expatria-Technologies/Remora-RP2040-W5500

The default GRBLHAL builds for the PicoBOB DLX include the following features that are implemented in the RP2040 port of GRBLHAL:

• Backlash Compensation.
• Stress-free Auto-squaring for the ganged axis
• Ganged axis offsets to correct for offset homing switches
• Step rates tested up to 180 KHz on 5 simultaneous axes.

For details, the Expatria development branch of the GRBLHAL RP2040 driver is located in this repository:
https://github.com/Expatria-Technologies/RP2040

For complete documentation on this OSHW design, see this Github repository:
https://github.com/Expatria-Technologies/PicoBOB_DLX

Note that the Mach3 breakout, G540, or USB cable are not included, the photos are only for illustrative purposes to show how the PicoBOB-DLX can be used.